Products Detail

You are here: Home / Products / Triac 0-10V Dimmable LED Driver / Constant Voltage Standard 100-277V UL FCC ICES / 60W 96W 100W Triac 0-10V Dimming Din Rail LED Driver for led light fixtures

Product Category

  Online shopping

60W 96W 100W Triac 0-10V Dimming Din Rail LED Driver for led light fixtures

Size               40*90*102mm (L*W*H)
N.W               0.3 kg
Warranty        5 Years
Availability:
  • Triac 0-10V

  • 100-277Vac (North America)

  • UL, FCC, CE, RoHS, REACH, Class 2


Output Power

Model Number

Input Voltage

Output Voltage

Output Current

Power Factor

Size

Weight

60W

KVG-12060-DWR

100-277V

12V

5A

PF 0.98

40*90*102mm

0.30kg

KVG-24060-DWR

24V

2.5A

KVG-48060-DWR

48V

1.25A

96W

KVG-24096-DWR

100-277V

24V

4A

PF 0.98

55*90*102mm

0.38kg

KVG-48096-DWR

48V

2A

100W

KVG-12100-DWR

100-277V

12V

8.34A

PF 0.98

55*90*102mm

0.38kg

KVG-24100-DWR

24V

4.17A

KVG-48100-DWR

48V

2.09A


60W 96W 100W Triac 0-10V Dimming Din Rail LED Driver for led light fixtures

·Output constant Voltage

·Range: 100-277VAC

·Built-in active PFC function

·High Efficiency

·Protections: short circuit/over load/ over temperature

·PWM frequency :4KHz,High frequency exemption level

·Rail installation method: Installed on TS-35/7.5 or TS-35/15 rail

·Cooling by free air convection

·Full protection plastic housing, for dry, damp location

·Dimming function:

·Phase dimming: work with forward phase /leading edge, MLV and Reverse phase /trailing edge, ELV, TRIAC dimmers

·0-10V dimming: 0-10V/1-10V/Potentiometer/10V PWM 4 in 1

·Output with fine-tuning voltage function good to slove the voltage drop

· Work indicator, real-time display of work status

· Dimming range: 0-100%

· Suitable for LED lighting and moving sign applications


UL8750 Slim 60W 96W 100W Triac Phase 0-10V Dimming Din Rail LED Driver 24v 48v LED Power Supply with PFC for led light fixtures


The Triac LED Driver can be mounted on 35mm / 7.5 or 15 Din rails to save cabinet space. Built-in active DC OK signal, LED indicator, 60w led driver no-load power loss :< 0.6 W.


High Efficiency : din rail led driver conversion efficiency up to 88%, can work at full load in the temperature range of -40℃ to +70℃, natural air cooling.


Safety Protection : AC single-group output power converter with short-circuit, overload and over-temperature protection to protect your led  light equipment.


Widely Used : The Triac LED Driver uses a plastic case with good insulation performance and is used in electromechanical equipment, DIY projects, home control systems and so more.


Cautions :  In order to prolong the service life, please don't let the transformer exceed the rated current for a long time! If you have any questions, please contact us in time. ( suretron led driver )


The device should be installed with input terminal block at the bottom.


Each device is delivered ready to install.


Fig.1 Mounting

Snap on the din rail as shown in Fig. 1 :

1. Tilt the unit upwards and insert in onto the DIN rail.

2. Push downwards until stopped.

3. Press against the bottom front side for locking.

4. Shake the until slightly to endure that it is secured.


Fig. 2 Dismounting

To uninstall, pull or slide down the latch with screw driver as shown in fig. 2

Then slide the power supply unit in the opposite direction,

release the latch and pull out the led driver unit from the  din rail


Previous: 
Next: 
Leave A Message

we will feed back within 24 working-hours.

  Support
  OEM/ODM
  FAQ
Leave a Message
Leave A Message

we will feed back within 24 working-hours.

Home

About

Contact Us

Tel: +86-136-1221-8677 
Landline: +86-756-6880938
E-mail: info@scpower.net.cn
Address: Building 3, No.19 Yongtian Rd., Xiangzhou, Zhuhai city, Guangdong province, China
Get a free quote
  Copryright © 2024 Zhuhai Shengchang Electronics Co., Ltd. All Rights Reserved. Sitemap. Privacy Policy.   粤ICP备14098035号-2