English 
Building 3, No.19 Yongtian Rd., Xiangzhou, Zhuhai city, Guangdong province, China
 |
| Model: | |
|---|---|
Triac 0-10V
Isolated
Constant Voltage
1CH (Dimming), 2CH (Dim to warn)
IP66, Dry & Damp, Wet
200-240VAC
30W, 40W, 60W
3V-42V
CE, RoHS, REACH
30 40 60 Watt CC Dim to Warm Triac 0-10V Dimmable Constant Current LED Driver 220vac 230vac
Output: | Constant Current |
NFC function: | Adjust output current by NFC; Switch between dim for single color and Dim to warm for CCT light by NFC |
Range: | 200-240VAC |
PFC design: | Built-in active PFC function |
Efficiency: | Up to 82% |
Protections: | Short circuit/ over load/ over temperature |
Heat dissipation: | Cooling by free air convection |
Waterproof performance: | IP66 (EU) |
Dimming function: | Phase dimming: work with leading edge, MLV and trailing edge, ELV, TRIAC dimmers. 0-10V dimming: 0-10V/1-10V/Potentiometer/10V PWM 4 in 1 |
Dimming range: | 1-100% |
Application: | Suitable for the application of indoor LED lighting |
Warranty: | 5 years warranty |
Output Power | Model Number | Output Voltage | Output Current | Size |
30W | KIG-030-W2C-DHL | 3-42V | 300-1050mA | 314.7*38.5*23.6mm |
40W | KIG-040-W2C-DHL | 3-42V | 400-1400mA | 314.7*38.5*23.6mm |
60W | KIG-060-W2C-DHL | 3-42V | 500-2100mA | 332*38.5*23.6mm |
Triac & 0-10V LED Power Supply
Dimming Operation and Connecting Diagram (Dim to warm)
l Using two ways of dimming at the same time, you must be assured that LED lighting is up to the max. Brightness then you could operate with the other dimming;
Using one dimming ---TRIAC/Phase cut dimming
1. The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection
a phase /Triac dimmer or lighting system.
2. Working with leading edge, MLV and trailing edge, ELV, TRIAC dimmers or light system.
3. Please try to use dimmers with power at least 1.5 times as the output power of the driver.
l Using one dimming ---0-10/ 1-10V/ 10V PWM/ Potentiometer dimming
30 40 60 Watt CC Dim to Warm Triac 0-10V Dimmable Constant Current LED Driver 220vac 230vac
Output: | Constant Current |
NFC function: | Adjust output current by NFC; Switch between dim for single color and Dim to warm for CCT light by NFC |
Range: | 200-240VAC |
PFC design: | Built-in active PFC function |
Efficiency: | Up to 82% |
Protections: | Short circuit/ over load/ over temperature |
Heat dissipation: | Cooling by free air convection |
Waterproof performance: | IP66 (EU) |
Dimming function: | Phase dimming: work with leading edge, MLV and trailing edge, ELV, TRIAC dimmers. 0-10V dimming: 0-10V/1-10V/Potentiometer/10V PWM 4 in 1 |
Dimming range: | 1-100% |
Application: | Suitable for the application of indoor LED lighting |
Warranty: | 5 years warranty |
Output Power | Model Number | Output Voltage | Output Current | Size |
30W | KIG-030-W2C-DHL | 3-42V | 300-1050mA | 314.7*38.5*23.6mm |
40W | KIG-040-W2C-DHL | 3-42V | 400-1400mA | 314.7*38.5*23.6mm |
60W | KIG-060-W2C-DHL | 3-42V | 500-2100mA | 332*38.5*23.6mm |
Triac & 0-10V LED Power Supply
Dimming Operation and Connecting Diagram (Dim to warm)
l Using two ways of dimming at the same time, you must be assured that LED lighting is up to the max. Brightness then you could operate with the other dimming;
Using one dimming ---TRIAC/Phase cut dimming
1. The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection
a phase /Triac dimmer or lighting system.
2. Working with leading edge, MLV and trailing edge, ELV, TRIAC dimmers or light system.
3. Please try to use dimmers with power at least 1.5 times as the output power of the driver.
l Using one dimming ---0-10/ 1-10V/ 10V PWM/ Potentiometer dimming
